![pexels-hilary-halliwell-698485](https://www.australianmanufacturing.com.au/wp-content/uploads/2021/03/pexels-hilary-halliwell-698485-696x437.jpg)
Lithium Australia (ASX:LIT) will soon pilot test its LieNA® spodumene conversion process that recovers lithium chemicals from the lithium-containing ore with minimal loss.
The initial pilot-plant test run scheduled for September this year will be completed with a pre-feasbility study of the LieNA® process.
Lithium Australia revealed that construction of critical pilot-plant components prepared from spodumene-bearing drill chips has already begun, with order for autoclave already in place.
LieNA® conversion process
Spodumene, an important source of lithium metals used in the manufacture of batteries, is converted to concentrates for commercial use.
However, during conversion, between 25% and 50% of the lithium within the ore fed to the concentrator is lost when conventional recovery processes are followed.
Furthermore, most operating converters cannot use fine material as feed, resulting in less-than-optimal recoveries and higher operational costs.
Lithium Australia claims its LieNA® hydrometallurgical process addresses the issue of recovery loss and feed rejection, given that LieNA® requires no roasting, and is capable of handling very fine spodumene particles.
“Lithium Australia’s LieNA® technology is the pinnacle for hydrometallurgical processing of spodumene, the principal hard-rock source of lithium,” said Lithium Australia MD Adrian Grifin.
“LieNA®, then, is designed to improve overall recovery and achieve better utilisation of existing resources: it’s about cost reduction, sustainability and maximising the benefit of our critical (and finite) resources.”